Features:
- Two models and 7 capacities each
- DFE Series (no outputs)
- E-DFE Series (with digital and analog outputs)
- Advanced Operating Modes
- Normal
- Peak tension and compression
- Load limits
- Pass-fail limits
- Statistical Calculations
- Mean with maximum and minimum values
- Coefficient of variation with mean and standard deviation
- Standard deviation with variance and mean
- Percent differentiation
- Integral Loadcells
- Accuracy ±0.25% full scale
- Mechanical overload protection to 150% full scale
- Simple Operator Interface
- High resolution display
- Menus, prompts and function keys for easy use
- Optional Outputs (standard on E-DFE models): RS-232 serial data, Mitutoyo Digimatic, ±2Vdc Analog
- NIST Calibration with Data - available IEC/ISO17025 cert with uncertainty
- 2 year warranty
| Model |
DFE Series Without Outputs |
| ounce |
gram |
pound |
kilogram |
Newton |
|
| DFE-002 |
32 x 0.04 |
1000 x 1 |
2 x 0.002 |
1 x 0.001 |
10 x 0.01 |
|
| DFE-010 |
160 x 0.2 |
5000 x 5 |
10 x 0.01 |
5 x 0.005 |
50 x 0.05 |
|
| DFE-025 |
400 x 0.5 |
10000 x 10 |
25 x 0.02 |
10 x 0.01 |
100 x 0.1 |
|
| DFE-050 |
800 x 1 |
25000 x 20 |
50 x 0.05 |
25 x 0.02 |
250 x 0.2 |
|
| DFE-100 |
1600 x.2 |
50000 x 50 |
100 x 0.1 |
50 x 0.05 |
500 x 0.5 |
|
| DFE-200 |
3200 x 4 |
- |
200 x 0.2 |
100 x 0.1 |
1000 x 1 |
|
| DFE-500 |
8000 x 10 |
- |
500 x 0.5 |
250 x 0.2 |
2500 x 2 |
|
| |
E-DFE Series with RS232, Mitutoyo and Analog Outputs |
| E-DFE-002 |
32 x 0.04 |
1000 x 1 |
2 x 0.002 |
1 x 0.001 |
10 x 0.01 |
|
| E-DFE-010 |
160 x 0.2 |
5000 x 5 |
10 x 0.01 |
5 x 0.005 |
50 x 0.05 |
|
| E-DFE-025 |
400 x 0.5 |
10000 x 10 |
25 x 0.02 |
10 x 0.01 |
100 x 0.1 |
|
| E-DFE-050 |
800 x 1 |
25000 x 20 |
50 x 0.05 |
25 x 0.02 |
250 x 0.2 |
|
| E-DFE-100 |
1600 x.2 |
50000 x 50 |
100 x 0.1 |
50 x 0.05 |
500 x 0.5 |
|
| E-DFE-200 |
3200 x 4 |
- |
200 x 0.2 |
100 x 0.1 |
1000 x 1 |
|
| E-DFE-500 |
8000 x 10 |
- |
500 x 0.5 |
250 x 0.2 |
2500 x 2 |
|
Specifications
- Accuracy: ±0.25% of full scale ± LSC
- Certification: calibration with NIST data, IEC/ISO17025 optional
- Data Sampling Rate: 5000 Hz
- Peak Capture Rate: 5000 Hz
- Display Update Rate: 10 Hz
- Tare Capacity: 10% full scale
- Overload Protection: 150% full scale
- Display Characteristics: high resolution, dot matrix LCD, 8 lines, 40 characters, adjustable contrast, invert and "hide" capability
- Automatic Shut Down: configurable time. May be disabled.
|
- Data Storage: 10 results, optional NEXYGEN software for unlimited storage and automated testing and analysis.
- Test Stand Control: Compatible with Chatillon TCD series test stands
- Outputs (E-DFE models) : RS-232, Mitutoyo (Digimatic) and ±2Vdc analog
- Power: Battery or direct AC operation. Universal Power: 120V / 230V, Rechargeable nickel metal hydride (supplied)
- Battery Life: 30 hours, continuous use. Gauge may be operated with direct AC power source
- Instrument Weight: 1.5 lbs
- Operating Temperature: 40 to 100 F (4 to 38 C)
- Warranty: 2 years
|
Do More... Pay Less!
The new Chatillon DFE series force gauges deliver more features without compromising easy of use, accuracy and, very importantly, costs to you. You'll do more with a Chatillon DFE series gauge and you'll get the reliability and quality that you've come to expect from Chatillon force measurement instruments.
Easy to Read Display
A large, easy to read dot matrix display can display up to eight lines of information. The high resolution display features contrast adjustments and can be inverted when required. The display can even be "hidden" at the press of a button. A load bargraph indicated load direction, measured load and safe load and helps to prevent overloads. The integral loadcells feature mechanical overload protection of 150% full scale.
Single Touch Operation
The rubber keypad features dedicated and dynamic function keys. The function keys correspond to displayed options and guide the user during operation. A navigation pod lets you navigate through the menus and to scroll and change values quickly. The innovative i key can be used to display critical information on the gauge such as gauge capacity and resolution, battery life, loadcell overload history, even service information including last calibration date or the location of service centers.
Comprehensive Results
The rubber keypad features dedicated and dynamic function keys. The function keys correspond to displayed options and guide the user during operation. A navigation pod lets you navigate through the menus and to scroll and change values quickly. The innovative "i" key can be used to display critical information on the gauge such as gauge capacity and resolution, battery life, loadcell overload history, even service information including last calibration date, or the location of service centers.
Dependable Measurements
The DFE series force gauge features an integral loadcell sensor that delivers repeatable, accurate results. The innovative load bargraph shows dynamic load, direction of load and warns you of pending overload conditions.
Calibrate and Verify Status
The DFE-series force gauge incorporates flash memory and hosts a set of self-diagnostic functions for monitoring the display, keypad and electronics. Using the "i" key, you have immediate access to battery conditions, including estimated battery life remaining. You can also view loadcell status, including the number of overloads that have been applied to the gauge. Zero offset verification is standard and a step by step calibration procedure is built into the gauge, allowing you to calibrate your DFE gauge with certified standards.
...You Get More from a Chatillon Gauge
|
High and Low Load or Pass Fail Limits
The DFE digital force gauge may be configured with High and Low Load Limits or Pass-Fail Limits. Load limits allow you to establish setpoints for your testing. If the gauge exceeds a setpoint value, the gauge can provide a visual and audible alarm. You can set up a pass-fail limit based on a limit range or on a nominal value with a percentage bandwidth. Based on your setup, the gauge will provide you with a Pass-Fail indication.
Advanced Testing With Statistics
The DFE digital force gauge operates in Normal and Peak modes. When peak operation is required, the display will indicate the peak reading and direction. Load values may be displayed in oz, g, kg, lb or N values.
Your DFE force gauge can store up to 10 test results in memory. Results may be viewed, cleared and used to calculate statistics. The gauge will display the number of results stored and will alert you when the memory is full.
- Calculate Mean and also show you the MAX and MIN values for your calculation
- Coefficient of Variation is calculated and displayed with the Mean and Standard Deviation value
- Standard Deviation is calculated and displayed with the Mean and the Variance value. Total Population and Sample (n-1) methods are supported
- Calculate and display percentage difference between consecutive test results.
|
Simplified Setup
Menus and intelligent prompts make gauge setup fast and easy. Gauge options are presented in "List Format". Using the navigation pod and function keys, you simply select the functions and parameters required. The gauge will guide you through the setup process. Default settings are provided and a "Quick Reset" allows you to re-establish defaults with a single key press. If your gauge features digital outputs, you can print your gauge setup parameters for record archiving or use it as a setup template for other DFE force gauges in your plant.
Personal Computer Integration
The E-DFE gauge features digital and analog outputs. RS-232 for integration with Chatillon NEXYGEN software and a Mitutoyo Digimatic output is available. The gauge will also supply an analog output of ±2Vdc. Use Nexygen software for data acquisition, graphical load v. time results, analysis and reporting. With Nexygen software, store an unlimited number of results for analysis.
Self Diagnostics
The DFE digital force gauge incorporates flash memory and hosts a set of self-diagnostic functions for monitoring the display, keypad and electronics. Using the "i" key, you have immediate access to battery conditions, including estimated battery life remaining. You can also view loadcell status, including the number of overloads that have been applied to the gauge. Zero offset verification is standard and a step by step calibration procedure is built in, allowing you to calibrate your DFE gauge with certified standards. |
Chatillon DFE and E-DFE force gauges are compatible with Chatillon TCD series test stands
|
